Articles
All articles | Recent articles
High-Temperature Measurements of Macroscopic Deformation Induced by Phase Changes: Application to Bauxite-Based Material
A. Coulon, E. de Bilbao, S. Brassamin, J. Poirier
CNRS, CEMHTI UPR3079, Univ. Orléans, F-45071 Orléans, France
received November 6, 2017, received in revised form January 3, 2018, accepted January 22, 2018
Vol. 9, No. 2, Pages 119-126 DOI: 10.4416/JCST2017-00085
Abstract
High-temperature measurements of macroscopic deformation are of great interest for better understanding the behaviour of materials used in high-temperature processes. However, such measurements are still challenging when performed on very heterogeneous materials such as the bauxite-based material studied here. In this work, a high-resolution camera is used in combination with a high-temperature furnace to monitor the change in size of a bauxite-based sample. The technique is applied to measure the change in diameter induced by phase transformation of the material and by the impregnation of molten oxides. The decrease in diameter owing to solid-liquid sintering has been assessed to 5 % and the formation of the expansive phases CaO·6(Al2O3,Fe2O3) and CaO·2(Al2O3,Fe2O3) makes the diameter increase by 0.5 and 5 %, respectively. It is also possible to identify the temperatures at which the transformations occur. The technique may be used to study the effect of corrosion on macroscopic deformation of refractories.
Download Full Article (PDF)
Keywords
Refractory materials, contactless measurement, deformation, high temperature, phase transformation
References
1 Zhu, S., Ding, S., Xi, H.a., Wang, R.: Low-temperature fabrication of porous SiC ceramics by preceramic polymer reaction bonding, Mater. Lett., 59, 595 – 597, (2005).
2 Blond, E., Schmitt, N., Hild, F., Blumenfeld, P., Poirier, J.: Effect of slag impregnation on thermal degradations in refractories, J. Am. Ceram. Soc., 90, 154 – 162, (2007).
3 Chotard, T., Soro, J., Lemercier, H., Huger, M., Gault, C.: High temperature characterisation of cordierite-mullite refractory by ultrasonic means, J. Eur. Ceram. Soc., 28, 2129 – 2135, (2008).
4 Ghassemi, A., Pak, A.: Pore scale study of permeability and tortuosity for flow through particulate media using lattice boltzmann method, Int. J. Numer. Anal. Method. Geomech., 35, 886 – 901, (2011).
5 Poirier, J., Qafssaoui, F., Ildefonse, J.P., Bouchetou, M.L.: Analysis and interpretation of refractory microstructures in studies of corrosion mechanisms by liquid oxides, J. Eur. Ceram. Soc., 28, 1557 – 1568, (2008).
6 Sako, E.Y., Braulio, M.A.L., Zinngrebe, E., van der Laan, S.R., Pandolfelli, V.C.: Fundamentals and applications on in situ spinel formation mechanisms in Al2O3-MgO refractory castables, Ceram. Int., 38, 2243 – 2251, (2012).
7 Stjernberg, J., Antti, M.-L., Nordin, L.-O., Odén, M.: Degradation of refractory bricks used as thermal insulation in rotary kilns for Iron Ore pellet production, Int. J. Appl. Ceram. Tec., 6, 717 – 726, (2009).
8 Stjernberg, J., Olivas-Ogaz, M.A., Antti, M.L., Ion, J.C., Lindblom, B.: Laboratory scale study of the degradation of mullite/corundum refractories by reaction with alkali-doped deposit materials, Ceram. Int., 39, 791 – 800, (2013).
9 Huber, T., Degischer, H.P., Lefranc, G., Schmitt, T.: Thermal expansion studies on aluminium-matrix composites with different reinforcement architecture of SiC particles, Compos. Sci. Technol., 66, 2206 – 2217, (2006).
10 Nam, T.H., Requena, G., Degischer, P.: Thermal expansion behaviour of aluminum matrix composites with densely packed SiC particles, Compos. Part A: Appl. S., 39, 856 – 865, (2008).
11 James, J.D., Spittle, J.A., Brown, S.G.R., Evans, R.W.: A review of measurement techniques for the thermal expansion coefficient of metals and alloys at elevated temperatures, Meas. Sci. Technol., 12 R1, (2001).
12 Montanini, R., Freni, F.: Non-contact measurement of linear thermal expansion coefficients of solid materials by infrared image correlation, Meas. Sci. Technol., 25, 015013, (2014).
13 Zhang, X.R., Fisher, T.S., Raman, A., Sands, T.D.: Linear coefficient of thermal expansion of porous anodic alumina thin films from atomic force microscopy, Nanoscale and Microscale Thermophysical Engineering, 13, 243 – 252, (2009).
14 de Bilbao, E., Prigent, P., Mehdi-Souzani, C., Bouchetou, M.L., Schimtt, N., Poirier, J., Blond, E.: Measurement of the volume expansion of SiC refractories induced by molten salt corrosion, J. Ceram. Sci. Tech., 4, 207 – 212, (2013).
15 de Bilbao, E., Prigent, P., Mehdi-Souzani, C., Bouchetou, M.-L., Schmitt, N., Poirier, J., Blond, E.: Measurement of the volume expansion of SiC refractories induced by molten salt corrosion. In: Proceedings of UNITECR 2013. Victoria, Canada, 2013.
16 Merzouki, T., Blond, E., Schmitt, N., Bouchetou, M.-L., Cutard, T., Gasser, A.: Modelling of the swelling induced by oxidation in SiC-based refractory castables, Mech. Mater., 68, 253 – 266, (2014).
17 Michel, R., de Bilbao, E., Poirier, J.: Recycling bauxite waste for the mineral Industry: phase transformations and microstructure during sintering, Waste and Biomass Valori., 1 – 11, (2016).
18 Bale, C.W., Bélisle, E., Chartrand, P., Decterov, S.A., Eriksson, G., Hack, K., Jung, I.H., Kang, Y.B., Melançon, J., Pelton, A.D., Robelin, C., Petersen, S.: FactSage thermochemical software and databases — recent developments, Calphad, 33, 295 – 311, (2009).
19 de Bilbao, E., Poirier, J., Dombrowski, M.: Corrosion of high alumina refractories by Al2O3-CaO slag: Thermodynamic and kinetic approaches, Metall. Res. Technol., 112 607, (2015).
Copyright
Göller Verlag GmbH