Articles
All articles | Recent articles
Microstructure and Mechanical Properties of Cf/SiC Composites Reinforced with Boron Nitride Nanowires
G. Zhu1,2,3, S. Dong1,2, J. Hu1,2, Y. Kan1,2, L. Gao1,2, X. Zhang1,2, Z. Wang1,2, Y. Ding1,2
1 State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
2 Structural Ceramics and Composites Engineering Research Center, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
3 University of Chinese Academy of Sciences, Beijing 100049, China
received August 31, 2016, received in revised form October 20, 2016, accepted November 11, 2016
Vol. 8, No. 1, Pages 31-38 DOI: 10.4416/JCST2016-00064
Abstract
Boron nitride nanowires (BNNWs) were first grown in situ into fiber preforms, and then Cf/SiC composites reinforced with the BNNWs were fabricated by means of chemical vapor infiltration (CVI) matrix densification. It was found that thanks to the incorporation of the BNNWs, the matrix of the Cf/SiC composites at micron scale is toughened notably, as evidenced by the results of indentation tests. Synergetic strengthening and toughening mechanisms including debonding, fracture, pullouts as well as crack branching and deflection attributed to BNNW-based micro-rods are observed. However, no significant increases in flexural strength and fracture toughness are obtained for the composites, possibly owing to the lower density of composites and strong interface bonding between the BNNWs and the matrix.
Download Full Article (PDF)
Keywords
Ceramic matrix composites, boron nitride nanowires, bending test, microindentation, toughness
References
1 Schmidt, S., Beyer, S., Knabe, H., Immich, H., Meistring, R., Gessler, A.: Advanced ceramic matrix composite materials for current and future propulsion technology applications, Acta Astronaut., 55, 409 – 420, (2004).
2 Naslain, R.: Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: An overview, Compos. Sci. Technol., 64, 155 – 170, (2004).
3 Krenkel, W.: Ceramic matrix composites: Fiber reinforced ceramics and their applications. Wiley-VCH, Weinheim, 2008.
4 Naslain, R.R.: The design of the fibre-matrix interfacial zone in ceramic matrix composites, Composites Part A, 29, 1145 – 1155, (1998).
5 Yang, W., Kohyama, A., Katoh, Y., Araki, H., Yu, J., Noda, T.: Effect of C and SiC/C interlayers on mechanical behavior of Tyranno-SA fiber-reinforced SiC matrix composites, J. Am. Ceram. Soc., 86, 851 – 856, (2003).
6 Naslain, R.R., Pailler, R.J.F., Lamon, J.L.: Single-and multilayered interphases in SiC/SiC composites exposed to severe environmental conditions: An overview, Int. J. Appl. Ceram. Tec., 7, 263 – 275, (2010).
7 Jia, Y., Li, K., Xue, L., Ren, J., Zhang, S., Zhang, X.: Microstructure and mechanical properties of carbon fiber reinforced multilayered (PyC-SiC)n matrix composites, Mater. Des., 86, 55 – 60, (2015).
8 Yang, W., Araki, H., Kohyama, A., Thaveethavorn, S., Suzuki, H., Noda, T.: Process and mechanical properties of in situ silicon carbide-nanowire-reinforced chemical vapor infiltrated silicon carbide/silicon carbide composite, J. Am. Ceram. Soc., 87, 1720 – 1725, (2004).
9 Qian, H., Greenhalgh, E.S., Shaffer, M.S., Bismarck, A.: Carbon nanotube-based hierarchical composites: A review, J. Mater. Chem., 20, 4751 – 4762, (2010).
10 Chou, T.W., Gao, L., Thostenson, E.T., Zhang, Z., Byun, J.H.: An assessment of the science and technology of carbon nanotube-based fibers and composites, Compos. Sci. Technol., 70, 1 – 19, (2010).
11 Hu, J., Dong, S., Zhang, X., Zhou, H., Wu, B., Wang, Z., Gao, L.: Process and mechanical properties of carbon/carbon-silicon carbide composite reinforced with carbon nanotubes grown in situ, Composites Part A, 48, 73 – 81, (2013).
12 Hu, J., Dong, S., Feng, Q., Zhou, M., Wang, X., Cheng, Y.: Tailoring carbon nanotube/matrix interface to optimize mechanical properties of multiscale composites, Carbon, 69, 621 – 625, (2014).
13 Sun, K., Yu, J., Zhang, C., Zhou, X.: In situ growth carbon nanotube reinforced SiCf/SiC composite, Mater. Lett., 66, 92 – 95, (2012).
14 Zhi, C.Y., Bando, Y., Wang, W.L.L., Tang, C.C., Kuwahara, H., Golberg, D.: Mechanical and thermal properties of polymethyl methacrylate-BN nanotube composites, J. Nanomater., 2008, 1 – 5, (2008).
15 Huo, K.F., Hu, Z., Chen, F., Fu, J.J., Chen, Y., Liu, B.H., Ding, J., Dong, Z.L., White, T.: Synthesis of boron nitride nanowires, Appl. Phys. Lett., 80, 3611 – 3613, (2002).
16 Chen, Y.J., Chi, B., Mahon, D.C., Chen, Y.: An effective approach to grow boron nitride nanowires directly on stainless-steel substrates, Nanotechnology, 17, 2942 – 2946, (2006).
17 Qiu, Y.J., Yu, J., Rafique, J., Ying, J., Bai, X.D., Wang, E.: Large-scale production of aligned long boron nitride nanofibers by multijet/multicollector electrospinning, J. Phys. Chem. C, 2009, 11228 – 11234, (2009).
18 Ahmad, P., Khandaker, M.U., Khan, Z.R., Amin, Y. M.: A simple technique to synthesize pure and highly crystalline boron nitride nanowires, Ceram. Int., 40, 14727 – 14732, (2014).
19 Zhi, C.Y., Bando, Y., Tang, C.C., Golberg, D.: Boron nitride nanotubes, Mater. Sci. Eng., R, 70, 92 – 111, (2010).
20 Pakdel, A., Zhi, C.Y., Bando, Y., Golberg, D.: Low-dimensional boron nitride nanomaterials, Mater. Today, 15, 256 – 265, (2012).
21 Zhi, C.Y., Bando, Y., Tang, C.C., Huang, Q., Golberg, D.: Boron nitride nanotubes: Functionalization and composites, J. Mater. Chem., 18, 3900 – 3908, (2008).
22 Lahiri, D., Hadjikhani, A., Zhang, C., Xing, T., Li, L. H., Chen, Y., Agarwal, A.: Boron nitride nanotubes reinforced aluminum composites prepared by spark plasma sintering: microstructure, mechanical properties and deformation behavior, Mater. Sci. Eng., A, 574, 149 – 156, (2013).
23 Zhu, G., Dong, S., Hu, J., Kan, Y., He, P., Gao, L., Zhang, X., Zhou, H.: In situ growth behavior of boron nitride nanotubes on the surface of silicon carbide fibers as hierarchical reinforcements, RSC Adv., 6, 14112 – 14119, (2016).
24 Chen, Y., Chadderton, L.T., Gerald, J.F., Williams, J.S.: A solid-state process for formation of boron nitride nanotubes, Appl. Phys. Lett., 74, 2960 – 2962, (1999).
25 Chadderton, L.T., Chen, Y.: Nanotube growth by surface diffusion, Phys. Lett. A, 263, 401 – 405, (1999).
26 Zhang, H., Yu, J., Chen, Y., Fitz Gerald, J.: Conical boron nitride nanorods synthesized via the ball-milling and annealing method, J. Am. Ceram. Soc., 89, 675 – 679, (2006).
27 Tatarko, P., Grasso, S., Chlup, Z., et al.: Toughening effect of multi-walled boron nitride nanotubes and their influence on the sintering behaviour of 3Y-TZP zirconia ceramics, J. Eur. Ceram. Soc., 34, 1829 – 1843, (2014).
28 Wang, W.L., Bi, J.Q., Wang, S.R., Sun, K.N., Du, M., Long, N.N., Bai, Y.J.: Microstructure and mechanical properties of alumina ceramics reinforced by boron nitride nanotubes, J. Eur. Ceram. Soc., 31, 2277 – 2284, (2011).
29 Yang, W., Araki, H., Tang, C., Thaveethavorn, S., Kohyama, A., Suzuki, H., Noda, T.: Single-crystal SiC nanowires with a thin carbon coating for stronger and tougher ceramic composites, Adv. Mater., 17, 1519 – 1523, (2005).
30 Tatarko, P., Grasso, S., Porwal, H., Chlup, Z., Saggar, R., Dlouhý, I., Reece, M.J.: Boron nitride nanotubes as a reinforcement for brittle matrices, J. Eur. Ceram. Soc., 34, 3339 – 3349, (2014).
Copyright
Göller Verlag GmbH